Audio Technica AT2035 Condenser Studio Recording Microphone+Pro Mic Boom Arm. Condition: BRAND NEW IN ORIGINAL PACKAGING. (1) Audio Technica AT2035 Side Address Cardioid Condenser Studio Microphone/Mic+Case.
(1) Rockville ROGAN STAND Pro Boom Arm Mic Stand with Fixed Mount+Desk Stand+Cable. Designed for critical home/project/professional studio applications and live performance, this side-address cardioid studio condenser delivers exceptional detail and low noise.
Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the AT2035 handles high sound pressure levels with ease. Along with its rugged construction and high-performance specifications, the AT2035 provides an exceptional level of consistency from model to model. It comes equipped with a protective pouch and a custom shock mount. Audio Technica AT2035 Side Address Cardioid Condenser Studio Microphone.
Large diaphragm for smooth, natural sound and low noise. Custom shock mount provides superior isolation.
Switchable 80 Hz high-pass filter and 10 dB pad. Includes custom shock mount & protective pouch. ELEMENT: Fixed-charge back plate, permanently polarized condenser.
FREQUENCY RESPONSE: 20-20,000 Hz. LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave. OPEN CIRCUIT SENSITIVITY: -33 dB (22.4 mV) re 1V at 1 Pa. MAXIMUM INPUT SOUND LEVEL: 148 dB SPL, 1 kHz at 1% T. 158 dB SPL, with 10 dB pad (nominal).
DYNAMIC RANGE (typical): 136 dB, 1 kHz at Max SPL. SIGNAL-TO-NOISE RATIO: 82 dB, 1 kHz at 1 Pa. PHANTOM POWER REQUIREMENTS: 11-52V DC, 3.8 mA typical. SWITCHES: Flat, roll-off;10 dB pad (nominal).WEIGHT: 14.2 oz (403 g). DIMENSIONS: 6.69" (170.0 mm) long, 2.05" (52.0 mm) maximum body diameter.
OUTPUT CONNECTOR: Integral 3-pin XLRM-type. ACCESSORIES FURNISHED: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8-16 threaded adapter; soft protective pouch. Best prices - We sell all Audio-Technica Products at great prices. Lifetime Customer Service by Audio-Technica product experts. Guaranteed legitimate and authentic merchandise.All About Your ROGAN STAND. How To Set Up Your ROGAN STAND. How To Set Up A Dynamic or Condenser Microphone to Your ROGAN STAND. 2 long M8 screw (for desk surface-mounting). 4 long M8 screw (for desk surface-mounting thicker desks). Fixed mounting plate to mount it into your desk (comes pre-installed to the C-clamp, see our video for how to install). Built-in 6.5 foot XLR cable that is hidden and run inside the boom arm stand. Why is this better than others? Our model includes a high-quality C-clamp so you can mount the stand to the side or the back of a table or desk.
But what really sets our item aside is that we also give you the ability to mount this to the top of the desk for a cleaner installation. This enables you to mount the boom arm in the most optimal location on your desk. We eliminate clutter by including a cable that is fixed inside of the boom arm and completely hidden. If you need to replace the cable you can easily replace it.
Our boom arm has a great telescoping mechanism that makes it easy to adjust yet it will firmly stay in place. The look of this is very professional and clean.There are no springs or other eye-sores. Our boom arm completely folds in half if you need to travel with it. We build our model out of Aluminum which costs more than steel. What makes this great is it will never rust and it is more light-weight and higher quality.
We include all the screws and cables, mic clip, and installation video for installing it on the top of your desk. Rockville ROGAN STAND Pro Boom Arm Mic Stand. Includes XLR cable built into the stand that is hidden inside the stand for a clean look. Deluxe pro version is one solid piece with no visible springs and an advanced articulation mechanism.Easily Mounts to the top of a desk (See our install video). Easily clamps to the side of a desk with the included C-Clamp (supports desks up to 2.3 inches thick). This is made out of aluminum which is rust-free and lighter weight.
Arm length: 19" + 19". Firmly stays in place once you adjust it. There is a safety locking pin for the arm to lock in place (other similar stands do not have this).
Foldable design, just pull the knob in the middle of the stand and it folds in half (Other similar stands do not have this). Standard 5/8 Mic Threads for Connecting Most Podcast and Vocal Microphones. Suitable for studios, broadcasting, podcasting, and more. If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options. We will send you a.To replace the item for a brand new one. All replacements and exchanges are free. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Microphones & Wireless Systems". The seller is "audiosavings" and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam.