Audio-Technica ATW-1322 System 10 PRO Rack-Mount Digital Mic System (2.4 GHz)

Audio-Technica ATW-1322 System 10 PRO Rack-Mount Digital Dual Handheld Mic System (2.4 GHz). Brand New in its Original Retail Box. Be sure to add me to your favorites list!

Here is what you get. System 10 PRO ATW-RC13 Rack-Mount Digital Wireless Receiver (2.4 GHz).

2 x ATW-RU13 System 10 PRO Receiver Unit (2.4 GHz). 2 x ATW-T1002 System 10 Handheld Unidirectional Microphone/Transmitter.

AT8456a Quiet-Flex Mic Stand Clamp. 2.4 GHz ISM Band.

Channel Selection, Sync, and Setup. Three Levels of Diversity Assurance. Can be Linked to Ten Receiver Units. Receiver Units Can Be Mounted Remotely. Audio-Technicas System 10 PRO Rack-Mount digital wireless system provides the same interference-free operation in the 2.4 GHz range (outside TV bands) as the original System 10 wireless system but with expanded features and versatility. The durable half-rack chassis is equipped to house two receiver units that can be operated locally or released from the chassis and mounted remotely (up to 328 feet away) via Ethernet cable. Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a stable, multichannel system with the simultaneous use of up to 10 channels. Like all the products in the System 10 wireless family, the PRO Rack-Mount features 24-bit operation, easy setup, clear, natural sound quality, and three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Space Diversity uses two antennas on each transmitter and receiver unit to maximize signal integrity. 2.4 GHz ISM band. 200' (60 m) open range environment with no interfering signals.

32 to 104°F (0 to 40°C) battery performance may be reduced at very low temperatures. 20 Hz to 20 kHz (depending on microphone type). Remote Receiver Connector: RJ45 Link Connector: RJ12.

XLR Balanced: 0 dBV 1/4 (6.3 mm) Unbalanced: +6 dBV. 100-240 VAC (50/60 Hz) to 12 VDC 0.5 A power supply switched mode external. Dimensions (W x H x D). 8.26 x 1.73 x 6.67 (209.8 x 44 x 169.3 mm). 33.2 oz (940 g).

13.89 x 10.24 x 3.35. ATW-RU13 System 10 PRO Receiver Unit (2.4 GHz).

2.24 x 0.75 x 3.06 (57 x 19 x 77.6 mm). 2.3 oz (64 g). 5.8 x 4.3 x 3.4. ATW-T1002 System 10 Handheld Unidirectional Microphone/Transmitter.

> 109 dB (A-weighted), typical. 20 Hz to 20 kHz. 24 bit / 48 kHz.

Following federal and national regulations. Two 1.5 V AA (not included). 32 to 104°F (0 to 40°C). 10.03 x 1.97 (254.8 x 50.0 mm). 9.9 oz (280 g).

12.7 x 2.9 x 2.8. 9:30am - 5:00pm Est. 9:30am - 12:00pm Est. Therefore, we offer UPS 3 Day Select and UPS Next Day Air Saver for a special low rate. Attention Canadian and International Buyers.

UPS is available upon request. The item "Audio-Technica ATW-1322 System 10 PRO Rack-Mount Digital Mic System (2.4 GHz)" is in sale since Monday, March 16, 2020. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Microphones & Wireless Systems".

The seller is "thecamerabox" and is located in Brooklyn, New York. This item can be shipped to United States, Canada, United Kingdom, Czech republic, Hungary, Australia, Greece, Portugal, Japan, Sweden, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Spain, Italy, Germany, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bermuda, Bolivia, Ecuador, Egypt, French guiana, Guadeloupe, Cambodia, Cayman islands, Macao, Martinique, Nicaragua, Peru, Pakistan, Paraguay, Reunion, Uruguay.

• MPN: ATW-1322
• Brand: Audio-Technica