Audio Technica AT897 Shotgun Condenser Microphone Mic+Case+Boom+Stand+Headphones

Package: Audio Technica AT897 Line + Gradient Condensor Microphones Designed for Field Acquisition In Film/TV/Video Production + Rockville Kick Drum/Guitar Amp Mic Stand With Steel Round Base, Fixed Boom, and Rubber Pad + Rockville DMS40 40 Microphone Boom Arm Studio Podcast USB Mic Stand with Desk Clamp + Rockville PRO-M50 Studio Headphones with Detachable Coil Cable, Case, and Extra Ear Pads. Condition: BRAND NEW IN ORIGINAL PACKAGING. (1) Audio Technica AT897 Shotgun Condenser Video/Film/Broadcast Microphone+Case. (1) Rockville Kick Drum/Guitar Amp Mic Stand, Steel Round Base+Fixed Boom+Rubber Pad. (1) Rockville DMS40 40 Microphone Boom Arm Studio Podcast USB Mic Stand+Desk Clamp. (1) Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad. Audio-Technica's AT897 is designed for field audio acquisition in film/TV/video production, professional recording, wildlife recording and broadcast applications. It mounts conveniently on a DV camcorder without adding noticeable heft, and remains out of the frame even with compact digital cameras. It also features smooth, natural-sounding on-axis audio quality and excellent off-axis rejection of sound arriving from the sides and rear of mic. Designed for video production and broadcast (ENG/EFP) audio acquisition. Short length (11) ensures mic stays out of the shot -- even when used with compact digital cameras.

Smooth, natural-sounding on-axis audio quality. Excellent sound rejection from the sides and rear of mic.

Operates on battery or phantom power. RoHS compliant-free from all substances specified in the EU directive on hazardous substances. ELEMENT: Fixed-charge back plate, permanently polarized condenser. POLAR PATTERN: Line + Gradient. FREQUENCY RESPONSE: 20-20,000 Hz. LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave. OPEN CIRCUIT SENSITIVITY: Phantom: -40 dB (10.0 mV) re 1V at 1 Pa // Battery: -41 dB (8.9 mV) re 1V at 1 Pa. IMPEDANCE: Phantom: 200 ohms // Battery: 300 ohms. MAXIMUM INPUT SOUND LEVEL: Phantom: 129 dB SPL, 1 kHz at 1% T.

// Battery: 115 dB SPL, 1 kHz at 1% T. DYNAMIC RANGE (typical): Phantom: 112 dB, 1 kHz at Max SPL // Battery: 98 dB, 1 kHz at Max SPL.

SIGNAL-TO-NOISE RATIO: 77 dB, 1 kHz at 1 Pa. PHANTOM POWER REQUIREMENTS: 11-52V DC, 2 mA typical. WEIGHT: 5.1 oz (145 g).

DIMENSIONS: 10.98" (279.0 mm) long // 0.83" (21.0 mm) diameter. OUTPUT CONNECTOR: Integral 3-pin XLRM-type.

ACCESSORIES FURNISHED: AT8405a stand clamp for 5/8"-27 threaded stands; AT8134 windscreen; battery; 5/8"-27 to 3/8-16 threaded adapter; protective carrying case. The RKDS is a multi-purpose mini mic stand. The most popular use of these are for kick drum mic stands, but there are so many other amazing uses for these. They really come in handy for any amp or instrument that has to be on the ground. You can use these to mic up a bass drum, kick drum, snare, guitar amp, or bass amp.

(Certain bass players prefer to have a mic). These are also perfect for floor stage mics, as a desk mic, or for use on the dais table at parties and corporate events. Additional uses are for a stand-up bass, or for saxophone players (sitting). There is so many ways these little stands come in handy.

Our stand weighs twice as much as others on the market because these are super-sturdy and solid. The RKDS has a 10.2 Steel Round Base with a rubber pad that eliminates unwanted noises. It has a 21.4 fixed boom arm that provides precise positioning for your mic. The stand adjusts from 18.7" to 28.7".

This bad-boy Weighs in at 6.6lbs! There is no better stand in its class at this price guaranteed! And we topped it off with a scratch-resistant powder coated finish so the stand looks beautiful for life! This uses a standard thread size of 5/8inch. Rockville Kick Drum/Guitar Amp Mic Stand With Steel Round Base, Fixed Boom and Rubber Pad. Low profile height adjustable microphone stand for kick drums and guitar amps.

Heavy-duty steel round base with rubber pad provide extreme stability. Fixed boom arm provides precise positioning. Booming length : 21.4 (54.5cm). Height adjustment : 18.7"- 28.7" (47.5cm - 73cm).

Base Diameter : 10.2 (26cm). Weight : 6.6 lbs (3 kgs).

About Rockville Quality Control Procedures. The Rockville brand stands for Quality, Innovation and Value.

All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality.

Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production.

During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. The Rockville DMS40 desktop microphone boom arm is the perfect accessory for any podcast, home studio setup, or broadcasting studio.

Its rotating design provides a maximum arm reach of 40 giving you freedom to place your mic anywhere you want! Our designers used the most sturdy and long lasting clamps and springs, with durable steel construction.

Rockville DMS40 40 Studio Desk Clamp Microphone Stand w/Boom Arm. Suitable for studios, broadcasting, podcasting, and more.

Arms: 20"+20" arm length for adjustment. C-shape desk clamp is made of aluminum alloy.

Fits any desk less than 2 inch thick. You can set the base stand in the desk firmly and adjust to your favorite position. High quality steel frame is sturdy and durable. Internal springs for silent and effortless positioning. Soft suede and leather ear cushions (interchangeable).

Leather hard travel protective case. Rockville brings you studio quality headphones and at an incredible price with its new PRO-M50 headphones. These are professional grade headphones that are guaranteed to ourperform headphones that cost triple the price! These feature ergonomically designed swiveling cups with interchangeable soft suede or leather finish cushions (included).

The ear cups seal tight for excellent sound isolation and minimal bleed. Inside these cups you'll find 40mm Neodymium drivers delivering accurate audio with an extended frequency range for clear and rich bass, and a full frequency range of mids and highs. These are closed back style headphones specifically designed for studio monitoring. These play back the sound with a flat frequency curve so you can hear your music exactly how it was recorded.

With the PRO-M50 you can expect to hear every detail of every song with extreme accuracy. These headphones cover full frequency ranges; even extending a bit past the frequencies that the human ear can hear.

The headband is made of soft leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. A detachable 51 coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated.

Adapter to ensure the best possible signal. A hard leather case is included to store and protect your new investment when you are on the go. Amazing sound quality will make these your go-to headphones whether in the studio or out and about! Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad.

Ergonomically designed swivel ear cups. Sturdy and durable steel headband and arms. Interchangeable leather and soft suede ear cups covers included. Detachable 51" coil cable made of 100% Oxygen Free Copper (158" fully extended). Gold plated 3.5mm connector.

Stainless steel headband frame and moving arms are durable and long-lasting. Frequency Response:10Hz - 25KHz. Net Weight:290g (with cable). If your item is defective within the first 30 days of when it was delivered to you; you have the following options. We will send you a.

To replace the item for a brand new one. If you want to return your item within the first 30 days of when it was delivered to you; you have the following options.

This includes blown speakers with burned voice coils. The item "Audio Technica AT897 Shotgun Condenser Microphone Mic+Case+Boom+Stand+Headphones" is in sale since Tuesday, December 26, 2017. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Microphones & Wireless Systems".

The seller is "audiosavings" and is located in Inwood, New York. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion.

• Wireless Technology: Not Applicable
• Brand: Audio Tech
• Model: AT897
• Weight: 5.1oz.
• UPC: 9007212866203
• Design: Clip-On
• Features: Noise-Cancelling
• Professional Compatibility: Video Filming
• Mount Type: None
• Sound Mode: Mono
• Battery Life: 1200hr.

• Impedance: 200ohm
• Type: Condenser Microphone
• Connectivity: Cable
• Usage: Professional
• Frequency Response: 20-20000Hz
• Pickup Pattern: Shotgun/Highly Directional
• Microphone Form Factor: Lavalier/Lapel
• MPN: AT897