Audio Technica AT4033aSM Cardioid Condenser Studio Mic with AT8449 Shock Mount

Audio Technica AT4033aSM Cardioid Condenser Studio Mic with AT8449 Shock Mount
Audio Technica AT4033aSM Cardioid Condenser Studio Mic with AT8449 Shock Mount
Audio Technica AT4033aSM Cardioid Condenser Studio Mic with AT8449 Shock Mount

Audio Technica AT4033aSM Cardioid Condenser Studio Mic with AT8449 Shock Mount
AT4033aSM Cardioid Condenser Studio Mic. The side address AT4033aSM offers low noise symmetrical transformerless circuitry that results in exceptional transient response and clean output signals. A strong up front presence characterizes the sonic signature of this 40 Series pro-audio classic. The AT4033aSM's 80Hz high pass filter easily switches between flat frequency response and a low end roll off that diminishes ambient noise and popping with closely miked vocals.

A strong up front presence characterizes the sonic signature of this versatile pro-audio classic. Transformerless circuitry virtually eliminates low frequency distortion and provides superior correlation of high speed transients. The 2 micron thick vapor deposited gold diaphragm undergoes a five step aging process so that the optimum characteristics achieved remain constant over years of use. Floating construction capsule assembly provides isolation from noise and vibration. Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections.

State of the art surface mount electronics ensure compliance with Audio-Technica's stringent consistency and reliability standards. Custom shock mount provides superior isolation. Element: Fixed charge back plate, permanently polarized condenser.

Frequency Response: 30-20,000 Hz. Low Frequency Roll Off: 80 Hz, 12 dB/octave. Open Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 Pa.

Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T. 155 dB SPL, with 10 dB pad (nominal). Dynamic Range: 128 dB, 1 kHz at Max SPL. Signal to Noise Ratio: 77 dB, 1 kHz at 1 Pa. Phantom Power Requirements: 48V DC, 3.2 mA typical.

Weight: 13.4 oz (380 g). Dimensions: 6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameter.

Output Connector: Integral 3-pin XLRM-type. Accessories: AT8449 shock mount for 5/8-27 threaded stands; protective carrying case. The item "Audio Technica AT4033aSM Cardioid Condenser Studio Mic with AT8449 Shock Mount" is in sale since Tuesday, December 29, 2020.

This item is in the category "Musical Instruments\Pro Audio Equipment\Microphones". The seller is "protechsandl" and is located in Hull. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.


Audio Technica AT4033aSM Cardioid Condenser Studio Mic with AT8449 Shock Mount


Microphone Mic Audio  Sitemap  Contact Us  Privacy Policies  Terms of Use