Audio Technica AT4033A Condenser Microphone Mic+Presonus Monitors+Headphones

Package: Audio Technica AT4033A Condenser Microphone w/ Shockmount, Dust Cover, and Case + Pair of Presonus Eris E3.5 3.5 Powered Studio Monitors Speakers with Acoustic Tuning + Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad. Condition: BRAND NEW IN ORIGINAL PACKAGING. (1) Audio Technica AT4033A Condenser Microphone Mic+Shockmount+Dust Cover+Case.

(1) Pair of Presonus Eris E3.5 3.5 Powered Studio Monitors Speakers w/ Acoustic Tuning. (1) Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad.

The latest edition AT4033a, offers low-noise, symmetrical, transformerless circuitry that results in exceptional transient response and clean output signals. A strong up-front presence characterizes the sonic signature of this 40 Series pro-audio classic. The AT4033as 80Hz high-pass filter easily switches between flat frequency response and a low-end roll-off that diminishes ambient noise and popping with closely-miked vocals. Includes the AT8449a shock mount for superior isolation. Audio Technica AT4033A Condenser Microphone w/ Shockmount, Dust Cover, and Case. Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients. Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity. The 2-micron-thick, vapor-deposited gold diaphragm undergoes a five-step aging process so that the optimum characteristics achieved remain constant over years of use.

Floating-construction capsule assembly provides isolation from noise and vibration. Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections.

State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards. Custom shock mount provides superior isolation. Element: Fixed-charge back plate, permanently polarized condenser.

Frequency Response: 30-20,000 Hz. Low Frequency Roll-Off 80 Hz, 12 dB/octave. Open Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 Pa. Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T. 155 dB SPL, with 10 dB pad (nominal). Dynamic Range (typical): 128 dB, 1 kHz at Max SPL. Signal-To-Noise Ratio 77 dB, 1 kHz at 1 Pa. Phantom Power Requirements: 48V DC, 3.2 mA typical. Switches: Flat, roll-off; 10 dB pad (nominal).

Weight: 13.4 oz (380 g). Dimensions: 6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameter. Output Connector: Integral 3-pin XLRM-type.

Accessories Furnished: AT8449a shock mount for 5/8-27 threaded stands; microphone dust cover; protective carrying case. Description of Eris E3.5. Monitors are used worldwide by audio engineers who need to hear every detail of their recordings. Ideal for gaming and home video production, the Eris E3.5 employs the same technology as the larger Eris models to deliver studio-quality sound, with a smooth and accurate frequency response. Yet theyre compact enough to fit almost anywhere.

Kevlar woofers deliver a cleaner overall sound. Every Eris-series studio monitor utilizes a custom-woven Kevlar low-frequency driver. The weave and nature of the Eris E3.5s 3.5-inch Kevlar woofer result in a more constant dispersion pattern throughout the frequency range, resulting in less time-smeared audio and cleaner overall sound.

Smooth high end and wide sweet spot. The Eris E3.5 is equipped with a one-inch silk-dome tweeter that produces a smooth and refined sound, accurately reproducing transients and high frequencies. The tweeter is designed to radiate sound with a fairly wide dispersion pattern, creating a large optimal listening area or sweet spot so you can move around and still hear everything accurately. A speakers response is affected by where you place it and the acoustics of your space. Thats why Eris E3.5 active media reference monitors offer easy-to-adjust high- and low-frequency controls. A convenient front-panel volume knob sets both the speaker level and the integrated headphone amplifier level. Be careful with that volume knob, though: Eris E3.5s are driven by an onboard 25 watt/side power amplifier and can get a lot louder than you may expect, while still delivering clear, accurate audio. Connect to virtually any line-level source. With three different types of audio inputs, its easy to feed audio to your Eris monitors from a mixer, an interface, a media player, or almost any other line-level source. The Eris E3.5 is equipped with rear-panel, ¼-inch TRS and RCA inputs, as well as front-panel -inch stereo, unbalanced line inputs for use with mobile audio devices. With this selection, youll have no problem hooking your Eris speakers up with virtually any line-level source, including your Smartphone or tablet.

The loud, clear, front-panel headphone amplifier lets you work and play in stealth mode, without disturbing your housemates. Like all PreSonus monitor speakers, the Eris E3.5 offers consistent, accurate listening, with the smooth and even frequency response that has made Eris monitors popular around the world. Their compact and powerful design makes them an ideal solution for any small space. Pair compact Eris E3.5s with PreSonus powerful Temblor® T8 active subwoofer for a truly full-range sound system that fits almost anywhere.

Pair PreSonus Eris E3.5 3.5 Powered Studio Monitors Speakers with Acoustic Tuning. 3.5-inch (89 mm) Kevlar® low-frequency transducer. 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer. Rear-firing acoustic port for superior bass-frequency reproduction.

High- and low-frequency tuning controls. Front-panel Volume control for speakers and headphone amplifier. 50 watt (25W/side), Class AB bi-amplification. RF interference, output current limiting, over-temperature, transient, and subsonic protection.

Amplifier soft start feature eliminates popping on power-up. Internal power supply with IEC connector. Power switch with on/off LED. Balanced ¼-inch TRS, unbalanced 1/8-inch stereo, and RCA inputs. Integrated stereo headphone amplifier with front-panel 1/8-inch output. Inputs: (1) Stereo 1/8" , (2) Balanced 1/4" TRS, (2) Unbalanced RCA. Frequency Response: 80 Hz - 20 kHz. Crossover Frequency: 2.8 kHz. LF Driver: 3.5 Kevlar. HF Driver: 1 Silk Dome. MF Control: Variable (-6 to +6 dB, center 100 Hz). HF Control: Variable (-6 to +6 dB, center 10 kHz). Product Dimensions (H x W x D): 8.3" x 5.6" x 6.4 inches.

Product Weight (Per Pair): 6.4 Lbs. For the Owner's Manual.

For the Quick Start Guide. Soft suede and leather ear cushions (interchangeable). Leather hard travel protective case. Rockville brings you studio quality headphones and at an incredible price with its new PRO-M50 headphones. These are professional grade headphones that are guaranteed to ourperform headphones that cost triple the price!

These feature ergonomically designed swiveling cups with interchangeable soft suede or leather finish cushions (included). The ear cups seal tight for excellent sound isolation and minimal bleed. Inside these cups youll find 40mm Neodymium drivers delivering accurate audio with an extended frequency range for clear and rich bass, and a full frequency range of mids and highs. These are closed back style headphones specifically designed for studio monitoring.

These play back the sound with a flat frequency curve so you can hear your music exactly how it was recorded. With the PRO-M50 you can expect to hear every detail of every song with extreme accuracy. These headphones cover full frequency ranges; even extending a bit past the frequencies that the human ear can hear.

The headband is made of soft leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. A detachable 51 coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated. Adapter to ensure the best possible signal. A hard leather case is included to store and protect your new investment when you are on the go. Amazing sound quality will make these your go-to headphones whether in the studio or out and about! Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad. Ergonomically designed swivel ear cups. Sturdy and durable steel headband and arms. Interchangeable leather and soft suede ear cups covers included. Detachable 51 coil cable made of 100% Oxygen Free Copper (158 fully extended).

Gold plated 3.5mm connector. Stainless steel headband frame and moving arms are durable and long-lasting. Net Weight: 290g (with cable).

Best prices - We sell all Samson Products at great prices. Lifetime Customer Service by Samson product experts. Guaranteed legitimate and authentic merchandise. If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options.

We will send you a. To replace the item for a brand new one. All replacements and exchanges are free.

Item Code: AT4033A+Eris E3.5+PRO-M50. The item "Audio Technica AT4033A Condenser Microphone Mic+Presonus Monitors+Headphones" is in sale since Tuesday, March 2, 2021. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Studio/Live Equipment Packages".

The seller is "audiosavings" and is located in Inwood, New York. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Brand: Audio-Technica
• MPN: AT4033A+Eris E3.5+PRO-M50
• UPC: 613815774938
• Type: Condenser Microphone
• Model: AT4033A+Eris E3.5+PRO-M50
• Connectivity: Wired, Plug-in, Wired Standard
• Microphone Form Factor: Handheld/Stand-Held
• Pickup Pattern: Cardioid
• Connector(s): 3 Pin XLRM
• Bundled Items: Carry Case/Bag, Cover/Windscreen, Shock Mount
• Country/Region of Manufacture: China